Although you might want to call an electrician like MZ Electric for most rewiring and electrical assessment jobs, replacing a simple light fixture should be one of the easier DIY jobs you can consider:
- The first step should be to turn off the electricity in your circuit panel. This is essential for your safety, and electricians consider it the most crucial step for working on any type of electrical fixture or device that cannot be unplugged from the power grid.
- Using a standard screwdriver – if applicable – remove the old fixture while making sure you don’t damage the bulbs or the fixture itself. Also, you will need to remove the old wire connectors before proceeding.
- Check to see if the electrical box that the old fixture was attached to is loose. If that is the case, tighten the screws until it no longer moves, and make sure the structure can support the new fixture’s weight.
- Connect the wires from your new fixture. Make sure you perform this step carefully, while keeping a close eye on the manufacturer’s instructions to avoid any improper wire connections.
- Finally, you need to secure the base and fold the wires into an available empty space within the canopy.
- Finally, replace the bulbs, install the trim, and cover your light fixture before reconnecting the light in the circuit panel and trying it out.
Be sure to never work on live wiring or reconnect the light while you’re working on the fixture. Also, it’s good practice to have an extra hand close by in case you need it, especially when working on installing a chandelier on a high ceiling.
Original Post on: DIY Light Fixture Installation: Simple Steps to Get the Job Done
No comments:
Post a Comment